As stated in the subject line. I got no speed indication on the speedo and the Power FC reads zero the whole time as well.
The car is a 1992 auto to manual swap w/SR. Wiring Specialties upper & lower harnesses.
I went
here and verified everything was hooked up properly for auto to manual swap with respect to the speed sensor- found I had the manual/auto to manual conversion plug mixed up; so I put the correct plug in... no fix.
Then I swapped in a known good speed sensor- no fix.
So here I sit. Before I go tearing into wiring diagrams etc; I wonder if maybe any of you guys have had & solved the same or a similar issue. Could it be something as stupid as a connector not connected behind the cluster? I feel like something isn't connected that should be and without looking in the books; I am stumped as to what it could be...
BTW- The speed indication was fine with the KA... and other than the lack of speed indication with the SR; the car runs like a wet dream.
Thanks in advance.
Mike