|
We ended up replacing the master, the slave, and checking all the lines. It seems like the master and slave were both bad. We replaced the slave, he actually built pressure but lost it. We replaced the master and he held the pressure and was fine. We are going to try tomorrow during the hottest part of the day [around 100+ degrees] and see and make sure all holds well. If he still loses pressure, we'll replace the lines [although I don't notice any leaks] and hope for the best.
As of now, nothing leaks. Pressure is being held AFTER replacing BOTH the slave and master. Slave engages fully and the master looks good behind the pedal. No bent brackets, no shifty looking parts that look wrong.
Fingers crossed.
|