Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - No Start issue... Hoped it wouldn't come to this

Diehardsr20 · 07-09-2013, 01:51 PM

Well I have disappointing news. I ordered the Wiring Specialties Harness (s13 sr20det to 89-94 s13) and coil pack harness, installed it. Still nothing. Called their tech support. He walked me through an assortment of things. I'm getting 12v to the coils, on all my wires from the body harness (black/white showing 12v, etc), Cam Angle Sensor is getting voltage. The guy on the tech line was as baffled as I am. His best guess is the ignitor chip is bad.

EDIT------------
So basicly your saying, Wurley, is that as I have someone turn the motor over I need to check for ohms between the connectors and the ignitor chip?

07-09-2013, 01:51 PM	#21
Diehardsr20 Join Date: Jun 2013 Location: Dexter, NM Posts: 37 Trader Rating: (0)	Well I have disappointing news. I ordered the Wiring Specialties Harness (s13 sr20det to 89-94 s13) and coil pack harness, installed it. Still nothing. Called their tech support. He walked me through an assortment of things. I'm getting 12v to the coils, on all my wires from the body harness (black/white showing 12v, etc), Cam Angle Sensor is getting voltage. The guy on the tech line was as baffled as I am. His best guess is the ignitor chip is bad. EDIT------------ So basicly your saying, Wurley, is that as I have someone turn the motor over I need to check for ohms between the connectors and the ignitor chip? Last edited by Diehardsr20; 07-09-2013 at 01:53 PM.. Reason: Ignitor chip continuity