Quote:
Originally Posted by Broadfield
The Alpine screens require signal on two different wires to allow it to display video.
Yellow/black is footbrake
Yellow/blue is e-brake
The sequence is as follows once the Alpine is powered on:
Engage the foot brake
E-brake on
E-brake off
E-brake on
Disengage foot brake
For virtually zero money, you can use a toggle switch to mimic the e-brake and wire the yellow/black to the foot brake. The sequence would be as follows:
Engage the foot brake
Toggle switch on
Toggle switch off
Toggle switch on
Disengage foot brake
Or, I sell a device that will do all of this automatically and instantly when you turn the Alpine on. It runs $29 shipped.
|
This works great. I have had the toggle switch set up for 6+ years on my alpine. very easy to install and cheap.