Quote:
Originally Posted by R@ddy
Op I understand you 100%.
All others don't understand your question. You're wondering what psi on the HX35 would be equivalent of 15psi out of an T25. the answer would be around 6psi. Run a 7psi spring in the wasyegate and you're good to go. I did this exactly when I had to drive my new motor to get dynoed
|
No, I understood his question and called it 100% if you read my post.
OP an HX35 isn't going to just "bolt" on. I'm sure you know this but you'll need a new downpipe, charge pipe and intake assemblies. No to mention a T3 foot print manifold.
You can find a good used T25 or T28(run lower boost) pretty cheap around here and call it a day. Then when funds allow upgrade to the setup you want.
Thanks for the compliment.