Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - WA S13 SR20DET blacktop with 5-spd trans and many NEW and aftermarket parts.

Torebaa · 08-25-2013, 09:55 PM

City: Edmonds
State/Province: Washington
Price: $2000.00 FIRM PLEASE PM ME! LOCAL PICKUP ONLY! NOT PARTING OUT PACKAGE DEAL ONLY!
Item Description: I have a S13 SR20DET blacktop for sale. This engine came out of a 1997 Kouki 180SX and has roughly 45,000 kilometers on it. I purchased this engine a couple years ago from the folks at U.P. Garage in Washington and have put many parts and hours into freshening it up. Unfortunately, I have lost complete interest in s-chassis' and the engine has been sitting. I've changed direction and I'm currently saving to purchase a new truck, so this engine and all the parts associated with it need to go!

I will require a bill of sale with this engine.

Please be sure to read everything the engine includes.

The list includes...
-1997 S13 Blacktop SR20DET with factory T25 turbo
-5-spd transmission
-Engine and transmission wiring harnesses (complete and uncut)
-J4 ECU
-Ignitor and coilpacks
-Side mount intercooler and ducting is included
-Airbox and MAF
-Starter, alternator, and powersteering pump
-Original flywheel
-Original intake manifold with injectors and fuel rail are included
-Original black valve cover is included
-Shifter and transmission plate
-Radiator hoses, fans and other miscellaneous bracketry/ducting

List of new and aftermarket items common to the engine...
-New oil pump
-New water pump
-New timing chain and timing chain tensioner
-New crank pulley
-New water inlet and outlet
-New dipstick tube and dipstick
-New S14 throttle body pulley
-New factory fuel rail
-New valve cover and oil cap (was going to have this powdercoated)
-New idle air control valve
-New water temp sensors
-Greddy intake manifold powdercoated black
-Greddy large sump aluminum oil pan
-Tomei expreme stainless turbo elbow

List of new and aftermarket items in the box...

-New bando accessory belts
-New fuel filter
-New oil filter
-New O2 sensor
-New throw out bearing and clutch sleeve
-New coil pack cover
-New Walbro fuel pump and wiring
-New transmission bolts and other miscellaneous hardware
-Nismo slave cylinder
-Nismo braided clutch line
-Nismo clutch pivot ball
-Nismo radiator cap
-Parts associated with Greddy intake manifold
-SR20DET gasket kit with some gaskets that haven't been put on the engine yet

As you can see there are a ton of parts! I'm sure I missed a bunch a long the way, but basically this engine needs a intercooler setup to go with the Greddy intake manifold (or you can use the stock parts), a radiator with shroud, a clutch, and maybe some small parts and its good to go.

Please look at my photobucket album for all the pictures of the engine and parts.

------>>>Engine And Parts Photos by TrevorJM744 | Photobucket<<<------

08-25-2013, 09:55 PM	#1
Torebaa Leaky Injector Join Date: Feb 2010 Location: Edmonds, WA Age: 34 Posts: 74 Trader Rating: (1)	S13 SR20DET blacktop with 5-spd trans and many NEW and aftermarket parts. City: Edmonds State/Province: Washington Price: $2000.00 FIRM PLEASE PM ME! LOCAL PICKUP ONLY! NOT PARTING OUT PACKAGE DEAL ONLY! Item Description: I have a S13 SR20DET blacktop for sale. This engine came out of a 1997 Kouki 180SX and has roughly 45,000 kilometers on it. I purchased this engine a couple years ago from the folks at U.P. Garage in Washington and have put many parts and hours into freshening it up. Unfortunately, I have lost complete interest in s-chassis' and the engine has been sitting. I've changed direction and I'm currently saving to purchase a new truck, so this engine and all the parts associated with it need to go! I will require a bill of sale with this engine. Please be sure to read everything the engine includes. The list includes... -1997 S13 Blacktop SR20DET with factory T25 turbo -5-spd transmission -Engine and transmission wiring harnesses (complete and uncut) -J4 ECU -Ignitor and coilpacks -Side mount intercooler and ducting is included -Airbox and MAF -Starter, alternator, and powersteering pump -Original flywheel -Original intake manifold with injectors and fuel rail are included -Original black valve cover is included -Shifter and transmission plate -Radiator hoses, fans and other miscellaneous bracketry/ducting List of new and aftermarket items common to the engine... -New oil pump -New water pump -New timing chain and timing chain tensioner -New crank pulley -New water inlet and outlet -New dipstick tube and dipstick -New S14 throttle body pulley -New factory fuel rail -New valve cover and oil cap (was going to have this powdercoated) -New idle air control valve -New water temp sensors -Greddy intake manifold powdercoated black -Greddy large sump aluminum oil pan -Tomei expreme stainless turbo elbow List of new and aftermarket items in the box... -New bando accessory belts -New fuel filter -New oil filter -New O2 sensor -New throw out bearing and clutch sleeve -New coil pack cover -New Walbro fuel pump and wiring -New transmission bolts and other miscellaneous hardware -Nismo slave cylinder -Nismo braided clutch line -Nismo clutch pivot ball -Nismo radiator cap -Parts associated with Greddy intake manifold -SR20DET gasket kit with some gaskets that haven't been put on the engine yet As you can see there are a ton of parts! I'm sure I missed a bunch a long the way, but basically this engine needs a intercooler setup to go with the Greddy intake manifold (or you can use the stock parts), a radiator with shroud, a clutch, and maybe some small parts and its good to go. Please look at my photobucket album for all the pictures of the engine and parts. ------>>>Engine And Parts Photos by TrevorJM744 \| Photobucket<<<------ Last edited by Torebaa; 10-27-2013 at 06:36 PM.. Reason: Price drop