Quote:
Originally Posted by Driftwire
Does it grind or does it just start to feel like the clutch is just makin the car move. Sounds like the slave cylinder is not disengaging enough though. My buddy had this issue and he used a bolt slightly longer then the pin in his slave and its worked great ever since as it pushed out the slave a little more but allows it to return to normal position when off the clutch
|
doesn't grind , just once i can finally push it into gear, or put it in first then start it, it does start rolling a bit. i tried a little nut on the end of the slave cylinder to give it "more throw" but didn't help.
Quote:
Originally Posted by DJ_Sunrise
I DO happen to have a used in good condition Nismo slave cylinder I am selling for $110 shipped 
-Bart |
i find it hard to believe that im having the same issue with a new slave cylinder but.. i'll keep this in mind.
side note. i've noticed my clutch pedal doesn't have the throw it had before. i used to have alot of movement in the clutch, i no longer have now. as soon as i slightly release the clutch pedal the car moves.