Quote:
Originally Posted by EsChassisLove
He pulls the pressure out through the exhaust during boost. Hope there's a check valve there.
|
Come on now, you actually think I wouldn't put a checkvalve in-line? It obviously has to be a very low spring pressure rating as well. I used the Vibrant pieces for my setup.
I have a Venturi plumbed into my exhaust, that has a line connected to my catch can. Under boost the Venturi will pull a vacuum on the can, which in turn pulls a vac on the VC. Two lines from my VC to the can. Then, in the factory location, I have my PCV setup.
You can get a normal two port can and have a third welded to it, or have a custom one made.