Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - HyperGear Turbochargers and high flows for Rb25det Skyline

hypergear · 10-12-2013, 09:55 AM

For a bolton unit in this HP range the ATR43SS2 would be a top choice. The price on those is $1250AUD each including braided oil line. This turbo bolton to factory manifold, dump, water, and oil. you will need a proper 4 inches induction pipe and a 2.5 inches 90 degrees silicon hose

Recent result from this turbocharger on E85 fuel as a direct bolton turbo on stock manifold internally gated:

321rwkws @ 19psi

and this one is from using pump 98 fuel, similar setup as above with factory exhaust manifold, internally gated as a oem replacement turbocharger:

If you are looking for around the 260~300rwkws (350~400) mark I would be recommending the SS2.5 or a standard high flow. Those are $850AUD including oil line.

10-12-2013, 09:55 AM	#21
hypergear Join Date: Feb 2007 Location: Melbourne Posts: 25 Trader Rating: (0)	For a bolton unit in this HP range the ATR43SS2 would be a top choice. The price on those is $1250AUD each including braided oil line. This turbo bolton to factory manifold, dump, water, and oil. you will need a proper 4 inches induction pipe and a 2.5 inches 90 degrees silicon hose Recent result from this turbocharger on E85 fuel as a direct bolton turbo on stock manifold internally gated: 321rwkws @ 19psi and this one is from using pump 98 fuel, similar setup as above with factory exhaust manifold, internally gated as a oem replacement turbocharger: If you are looking for around the 260~300rwkws (350~400) mark I would be recommending the SS2.5 or a standard high flow. Those are $850AUD including oil line.