Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Engine Swap partial success, clutch don't work, but why?

lsx_257 · 09-01-2004, 11:49 PM

yo just a thought cltuches might different. im useing a dohc cltuch in my car which is a sohc motor but im using a custom made slave that pushes the fork out further.

TP, to get out the pilot bearing, wet toiet paper and jam it in the hole, hammer it in with the same size hole like a socket or short metal rod and slowly it will pop out. it does not scar anything. its ghetto but its works, its an old 240z trick that worked for me.

09-01-2004, 11:49 PM	#8
lsx_257 Join Date: Aug 2004 Location: sf bay to sr Posts: 2 Trader Rating: (0)	the T P pilot trick yo just a thought cltuches might different. im useing a dohc cltuch in my car which is a sohc motor but im using a custom made slave that pushes the fork out further. TP, to get out the pilot bearing, wet toiet paper and jam it in the hole, hammer it in with the same size hole like a socket or short metal rod and slowly it will pop out. it does not scar anything. its ghetto but its works, its an old 240z trick that worked for me.