Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

racepar1 · 11-07-2013, 07:20 PM

This is a PAIR of Porsche calipers, made by Brembo. These are 928 S4 rear calipers, about the same dimensions as a 300zx 26mm caliper. The original rotor diameter was 299mm (11.77") and 24mm thick (.94"). I would use a 12" diameter, 1" thick rotor with these personally. The calipers are in mechanically good shape, no leaks. The finish is a little rough and they could definitely use a re-paint. You will need custom brackets and rotors to use these. I do not have the brackets or rotors. These would make a GREAT front setup on a lower powered/lightweight car (miata, ae86, 240, etc...) and probably would not require a master upgrade due to the smaller pistons. They would also make a GREAT rear setup for a higher powered car. Pair these with a set of Porsche Brembo "big red" or the corresponding 928 S4 front calipers and you'll be able to stop the earth's rotation at will!

SOLD!

11-07-2013, 07:20 PM	#1
racepar1 Post Whore! Join Date: Jul 2007 Location: Simi Valley, CA Age: 42 Posts: 9,006 Trader Rating: (106)	Porsche Brembo calipers, CHEAP!!! This is a PAIR of Porsche calipers, made by Brembo. These are 928 S4 rear calipers, about the same dimensions as a 300zx 26mm caliper. The original rotor diameter was 299mm (11.77") and 24mm thick (.94"). I would use a 12" diameter, 1" thick rotor with these personally. The calipers are in mechanically good shape, no leaks. The finish is a little rough and they could definitely use a re-paint. You will need custom brackets and rotors to use these. I do not have the brackets or rotors. These would make a GREAT front setup on a lower powered/lightweight car (miata, ae86, 240, etc...) and probably would not require a master upgrade due to the smaller pistons. They would also make a GREAT rear setup for a higher powered car. Pair these with a set of Porsche Brembo "big red" or the corresponding 928 S4 front calipers and you'll be able to stop the earth's rotation at will! *SOLD!* Last edited by racepar1; 11-09-2013 at 11:20 PM..