Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

redline racer510 · 11-10-2013, 09:08 PM

mods
S14 rb25det s1 swap (stock)
greddy intake manifold
custom t3 turbo manifold
Tial 46mm wastegate
Holset hx35
top feed 850cc bosch injectors
aeromotive FPR
3-inch exhaust
nistune type 2
Target HP 400~
blah blah blah etc......

I want to run a blow through MAF and have googled around for some info and opinions and for the most part there is mixed feelings about running them. I would like to run a blow-through n62 but want to know what you guys think and any better alternatives if there are any. The main reason I want to go blow through is cleaning up the amount of piping near the turbo(vac lines,IC piping,BOV recirc pipe,etc).

11-10-2013, 09:08 PM	#1
redline racer510 Zilvia FREAK! Join Date: Dec 2007 Location: EARFF(earth for you idiots) Posts: 1,072 Trader Rating: (1)	RB25det MAF options mods S14 rb25det s1 swap (stock) greddy intake manifold custom t3 turbo manifold Tial 46mm wastegate Holset hx35 top feed 850cc bosch injectors aeromotive FPR 3-inch exhaust nistune type 2 Target HP 400~ blah blah blah etc...... I want to run a blow through MAF and have googled around for some info and opinions and for the most part there is mixed feelings about running them. I would like to run a blow-through n62 but want to know what you guys think and any better alternatives if there are any. The main reason I want to go blow through is cleaning up the amount of piping near the turbo(vac lines,IC piping,BOV recirc pipe,etc). __________________ WARNING: User has a low tolerance for stupidity. Post at your own risk.