Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - NC Attic Cleanout (s13/s14 OEM stuff) LARGE PICS

Air · 01-03-2014, 09:38 PM

Aftermarket Stuff or Other Stuff

DEI 522T Trunk/Hatchback Release kit. This is brand new, the box is just missing. I bought to add trunk release to my civic using my viper alarm and just never actually felt like doing it. They are around $30 new IIRC ($10)

Viper Alarm with remote start. THis was pulled from a Jbody cavalier that I sold, so its been used. Its a 160XV system with a 555L GM Passlock interface. It comes with one used remote. ($50)

GM 5.3 Truck Heads - 706 Casting. These were pulled from a running truck for a upgraded set. They have valves but no springs or rockers. ($100)
Casting Number 706 and 862
Head: 1999+ LM4 4.8L / LM7 5.3 Liter Truck
Material: Aluminimum
Part Number:
12559862
12561706
Combustion Chamber Volume: 61.15cc
Compression Ratio: 9.5:1
Intake Port Volume: 200cc
Exhaust Port Volume: 70cc
Intake Valve Diameter: 1.89 inches
Exhaust Valve Diameter: 1.55 inches
Better photos can be provided upon interest. They are in excellent shape with no broken or stripped threads and all surfaces are free of marring.

Daft Racing Front Sway-Bar spacers. THis allows the use of a stock fitment swaybar with a engine swap (Designed for LS, but works with others). There is 1 missing bolt. I used these until i switched to the sikky swap bar. ($25)

LS Throw Out Bearing - Used for approx 5000 miles until I changed to a new clutch. ($15)

Double DIN radio cd-case holder. Its in great shape. ($5)

Autometer Phantom narrowband Air-Fuel Ratio (AFR) gauge. Back of the gauge has scratches but the face and bezel are in great shape. I used it to fill a empty slot in my gauge panel until I found a wideband. ($10)

Russel GM to -4AN Clutch adapter, NEW!!! This fitting is used to adapt the GM slave cylinder to a standard -4AN line for use with a aftermarket or OEM master. I think they came in a 2 pack which is why i have this, either that or Im

dumb and ordered it twice. anyways, ($10)

Toyota Tacoma (2004) muffler, used for ~50,000 miles. Removed for a flowmaster to be installed. The hangers were cut off by the baffoons at the muffler shop, so new ones would need to be added. Other than that it is in great shape and

there is plenty of pipe to weld to. ($10)

Tippman paint ball gun part. I have no friggin idea what this is or what it does. if you know please tell me so I can accurately describe it. ($free with purchase)

D2 Lower Shock Mounts for S13 Rear. These are dirty and have some scratching but are in functional shape. I switched to Z32 Rear uprights so I had to buy the z32 rear lowers from D2 for $texas... These are ($10)

Junkyard Transmission Cooler. I got this to use as a PS cooler but found one I like better. It had 2 tabs at the bottom that were cut off so you will have to devise some other way to mount it. It has been thoroughly flushed. ($10)

01-03-2014, 09:38 PM	#7
Air Join Date: May 2006 Location: NC Posts: 26 Trader Rating: (0)	Aftermarket Stuff or Other Stuff DEI 522T Trunk/Hatchback Release kit. This is brand new, the box is just missing. I bought to add trunk release to my civic using my viper alarm and just never actually felt like doing it. They are around $30 new IIRC ($10) Viper Alarm with remote start. THis was pulled from a Jbody cavalier that I sold, so its been used. Its a 160XV system with a 555L GM Passlock interface. It comes with one used remote. ($50) GM 5.3 Truck Heads - 706 Casting. These were pulled from a running truck for a upgraded set. They have valves but no springs or rockers. ($100) Casting Number 706 and 862 Head: 1999+ LM4 4.8L / LM7 5.3 Liter Truck Material: Aluminimum Part Number: 12559862 12561706 Combustion Chamber Volume: 61.15cc Compression Ratio: 9.5:1 Intake Port Volume: 200cc Exhaust Port Volume: 70cc Intake Valve Diameter: 1.89 inches Exhaust Valve Diameter: 1.55 inches Better photos can be provided upon interest. They are in excellent shape with no broken or stripped threads and all surfaces are free of marring. Daft Racing Front Sway-Bar spacers. THis allows the use of a stock fitment swaybar with a engine swap (Designed for LS, but works with others). There is 1 missing bolt. I used these until i switched to the sikky swap bar. ($25) LS Throw Out Bearing - Used for approx 5000 miles until I changed to a new clutch. ($15) Double DIN radio cd-case holder. Its in great shape. ($5) Autometer Phantom narrowband Air-Fuel Ratio (AFR) gauge. Back of the gauge has scratches but the face and bezel are in great shape. I used it to fill a empty slot in my gauge panel until I found a wideband. ($10) Russel GM to -4AN Clutch adapter, NEW!!! This fitting is used to adapt the GM slave cylinder to a standard -4AN line for use with a aftermarket or OEM master. I think they came in a 2 pack which is why i have this, either that or Im dumb and ordered it twice. anyways, ($10) Toyota Tacoma (2004) muffler, used for ~50,000 miles. Removed for a flowmaster to be installed. The hangers were cut off by the baffoons at the muffler shop, so new ones would need to be added. Other than that it is in great shape and there is plenty of pipe to weld to. ($10) Tippman paint ball gun part. I have no friggin idea what this is or what it does. if you know please tell me so I can accurately describe it. ($free with purchase) D2 Lower Shock Mounts for S13 Rear. These are dirty and have some scratching but are in functional shape. I switched to Z32 Rear uprights so I had to buy the z32 rear lowers from D2 for $texas... These are ($10) Junkyard Transmission Cooler. I got this to use as a PS cooler but found one I like better. It had 2 tabs at the bottom that were cut off so you will have to devise some other way to mount it. It has been thoroughly flushed. ($10)