Silver Mine Motors has just started selling high angle knuckles for the 240sx. We are giving all Zilvia members a discount! $200 plus core ($75) for a pair of knuckles. PM, call or email me for special pricing. (818) 636-2797
[email protected]
Here is an installation video
MODIFIED KNUCKLE INSTALLATION 240SX SILVER MINE MOTORS EVAN VHADAT - YouTube
Description:
High angle knuckles for your 240sx. These knuckles allow you to turn your wheels to the maximum angle without over centering your tie rods. After months of test fabrication and research and development we at Silver mine Motors have come up with the winning formula! These knuckles have been tested and proven at drift events, and on our shop car. They will allow you to turn your front wheels much farther than any other modified knuckle. Drop tie rod pickups move your tie rod angle lower so they are more parallel to your lower control arms. Shortened tie rod arms make for faster responsiveness to slight movements of the steering wheel, as well as turning your wheels to an angle you never though possible! Months of testing ensures that these knuckles are modified so that they will not over center during full lock turns. Mig welded 3 times over by our certified professional automotive welder with 25 years’ experience in fabrication! Cleaned and painted with thick high gloss paint. Note: you will need to use longer inner and out tie rods with these knuckles. We recommend 1998 240sx S14 inner and 1989-1990 Nissan Maxima outer tie rods. Installation takes only 2 hours. Silver Mine Motors does not take any responsibility for any accidents/ losses caused by or in conjunction with these parts, or any other race parts we sell. Buyer assumes all risk when operating a vehicle with modified parts.