Sup guys? I've been looking all over the place, but since everyone stretches tires, and goes for all the stances these days, I've got some questions.
I've recently aquired some Cosmis wheels, 18x10 +20 in the rear, and have a line on some free Nitto NT05's that are 275/35/18's (like, 8 for free!!). Of note, the 275s run an actual 266 as per FD measuring, so they're kinda like a wide 265/35.
Question is, will those tires fit on the x10 +20's without stupid camber? I'm really not wanting to go past -1.5, and would like to stay as close to zero as possible.
Pic for reference. mexipoke due to 25mm H&R spacers to my my G35's sit all fancy like, but maybe you can get the picture.
Wheels are the x10 +20's, with a 235/40 mounted. With somewhere around 0.0 to -0.5 or -1.0 camber.
I'll see if I can find a better shot of the rears, test fit only lasted about 10 minutes.
Honestly, I prob need to just mount one up, pull the spacer, and test fit, but I'm just here to see what you guys know before I waste my time runnin' round like that.