View Single Post
Old 03-24-2014, 01:02 PM   #3
jerryscherry
Zilvia Junkie
 
Join Date: Nov 2010
Location: Diamond Bar
Age: 35
Posts: 448
Trader Rating: (10)
jerryscherry is an unknown quantity at this point
Quote:
Originally Posted by Kingtal0n View Post
SR ? KA ?

Sounds like you need to pull your transmission and check the throw-out bearing. Expect to replace it while you are in there (order a new one in advance) might as well.

good time to replace the clutch also. And the pivot ball (buy a nismo).
now that you mention it,

This is a SR, just recently did a clutch job, with a RPS Streetmax Clutch/pressure plate, resurfaced oem flywheel

when we were doing the job, the pilot bearing was cracked and broke off LOL. but we replaced that with a new one, but we noticed the input shaft/sleeve where the TOB goes on was also cracked, hmm maybe this was the problem? maybe after a while it just completely cracked.

the weird thing is, its worse in the morning, but after driving for a few minutes, the vibration/sound is almost completely gone, unless you are in high rpms.
jerryscherry is offline   Reply With Quote