|
is there any slack in the line? take off the ebrake cover inside the car and see if you can pull on the e-brake cable when its all the way pulled up. it could have just gotten loosened in the shop and they didnt retighten it, who knows. if its got slack or is loose, simply put the e-brake down, and loosen the nut holding the cable in place. then, pick up the slack and feed it through, then retighten. if that still didnt work then i would check the nut that holds down the wire on the brake caliper itself, that could have gottent disconnected or the bolt isnt on tight enough.
|