|
SR20 Reliability Build Questions
I am currently running a bone stock redtop SR with the exception of a few bolt ons:
-hks actuator
-intercooler
-full exhaust
-rocker arm stoppers
I am soon going to be redoing the entire motor setup to accomplish the following tasks; 300rwhp, reliable SR. I have researched for a long time on various forums and I have found that in order to do this I would probably need the following parts:
-ARP headstuds
-apexi/tomei headgasket (don't know the size, was thinking 87x1.1mm)
-550cc or larger injectors
-s15 t28
-power fc or retune of ECU
-tomei poncam (256)
-koyorad (recommendations on size appreciated)
-perhaps keep stock clutch fan setup??? Advice here as well
-z32 maf
-oil pan (upgraded size)
Is there anything else I could be missing for reliability wise? I am interested in a RELIABLE 300whp on the SR. The motor will be seeing lots of use bot on and off the track, so reliability will be key. I have been told to keep internals stock at this power range, but I have also been told that upgrading the internals wouldn't hurt. Interested in any advice and opinions. This is my first SR after owning an RB for 3 years.
|