Quote:
Originally Posted by cheesesteak
A muffler would not have any flange or tip on them. I know you've heard the term cat-back system - components after the cat. Same can be said for anything after the axle. You may disagree that it's only a muffler, correct but it's provisioned already to be connected to the mid-pipe.
|
To be defined as an "axleback" exhaust it should be able to bolt onto the STOCK exhaust from the axle back. Since stock s13/s14 exhausts are one-piece from the cat back NOBODY EVER made an axleback system. Let's be honest. You're missing the rest of the exhaust, which does NOT make it an axle-back exhaust. It makes it a nice muffler that's missing the piping. Nobody cares if it has the flange. The rest of the exhaust would have to be fabricated anyways. It's a muffler, NOTHING more...
Quote:
Originally Posted by No 240.. No id
Before you start taking a sh** on someones thread, go and educate your self. Tanabe make an axle back exhuast for an s13 and so to nismo. http://m.ebay.com/itm/270904740948?nav=SEARCH
Just because YOU haven't seen them much, doesn't mean there are NONE. |
The link you posted was to a catback exhaust dumbfuck. Since stock s13/s14 exhausts are one-piece from the cat back NOBODY EVER made an axleback system. I've been doing this for a LOT longer than you have so don't try and lecture me on what I've seen.