|
jz no starty
Trying to start vvti 1jz out of a '97 chaser.
Cranks strongly but will not fire.
What I've tried so far:
-added chassis to engine grounds, grounded ecu
-confirmed ecu works
-used starting fluid (starts with this)
-checked fuel pressure before and after the rail , 44psi
-had fuel injectors flow tested, all 6 work
-checked electrical signal to injector via noid light all work
-confirmed motor has spark, tested via spark plug out side of motor
I have not checked compression or timing due to the motor starting and running for about 2-3 seconds when I spray starter fluid into the intake mani. Thinking vaccum line leak?
Thoughts?
|