|
s13sr acl bearings, what oil weight?
What oil weight should I run with acl standard size bearings? I just finished rebuilding my sr with acl mains and rods and have had it out for a couple drive's now. I put in 10w30, oil pressure is lower than it was before I rebuilt it and I am wondering if this has to do with larger bearing clearances.
@ 160F oil temp
13psi idle,
35-40psi 3200rpm.
I would like to see those higher as I know my oil temp will get a lot hotter. I am thinking of changing to at least 10w40 but I am interested to know if what I am seeing is normal.
|