|
the easiest way is, use the redtop compressor, use the redtop A/C compressor lines, and weld your existing KA24 to the redtop compressor A/C lines. You just cut off the ends and clean them up then tig weld around them. I've done it about 50 times this is the quickest easiest method. Someone with a tig welder (if you do not weld) should do it for $40 if you clean them up and cut them (and make them fit together without any gap) . clean with a wire brush (brand new) then acetone right before the weld. it takes about 80-100 amps.
|