Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

TheSnail · 10-03-2004, 03:08 PM

Well the 300zxtt tranny is very strong. 900hp+ So you can use what ever clutch and shift how every you want with 5-600hp. Though it does not bolt up to the sr. But for the rb20/25/26 guys, they can get a rb26 bell housing (cheap) and bolt the 300zx tranny (550ish) to it. Just like the sr/ka tranny swap. If you want one on the sr you would have to make a addapter plate. If you gone this far you could also get a t56 for an extra 700$ but it is 10spline, and the nissan 23 spline (24 maybe, cant rem), so you would have to have a custom clutch made. Though the fact that the 300zxtt imput shaft slides right in is anouther bonus of the 300zx tranny.

10-03-2004, 03:08 PM	#6
TheSnail Nissanaholic! Join Date: Jan 2004 Location: Marietta Georgia Age: 42 Posts: 2,434 Trader Rating: (0)	Well the 300zxtt tranny is very strong. 900hp+ So you can use what ever clutch and shift how every you want with 5-600hp. Though it does not bolt up to the sr. But for the rb20/25/26 guys, they can get a rb26 bell housing (cheap) and bolt the 300zx tranny (550ish) to it. Just like the sr/ka tranny swap. If you want one on the sr you would have to make a addapter plate. If you gone this far you could also get a t56 for an extra 700$ but it is 10spline, and the nissan 23 spline (24 maybe, cant rem), so you would have to have a custom clutch made. Though the fact that the 300zxtt imput shaft slides right in is anouther bonus of the 300zx tranny. Last edited by TheSnail; 10-03-2004 at 05:42 PM..