Hey guys! Just looking for opinions here if my results seem right to you guys.
Specs;
GTX2867R 3" Intake, Z32 MAF
Stock Mani w/ EWG 38mm, Cobb tuning IWG delete
740cc Inj.
Tomei Poncams 256/256
OEM Re-Ringed Piston Rings, Honed properly, clearances good (Piston to wall, piston ring gap, etc)
RS Enthalpy dyno tuned by Martin
RS Enthalpy Z32 Coilpacks, and modified ignitor/er
Apexi 1 piece 3" Exhaust
Cosworth HG, ARP Studs
Stock Intake Manifold
3" Intake piping, 2.75" Hotpipe
92 Octane
Results; 362whp/358 ft. lbs tq @ 20PSI
AFR 11.5-11.7
Dyno Sheet;
Dyno Video;
Tried removing exhaust to see if restriction was there, but same results, same goes with removing the suction filter.
Wanting to break 400whp, think 264/264 BC Cams & Ti Springs (of course), + Freddy Intake Mani will get me there?