|
i need help.
my car won't fire. i already know it's the injectors not firing.
fuel is getting to the rail
i'm running bosch 750cc high imp
the injectors fire if i use a 9v battery to test the solenoid. so they are not stuck.
the harness is all custom.
i have deleted the stock resistor box. i run a direct 12v line from ignition to the injectors and then from the injectors directly to the ecu.
with ign on i get 12v at the injector plugs.
my multimeter isn't able to see the ecu pulse but i'm getting my hands on a noid set tomorrow.
ecu is an aem v2 and i have used the wizard to select the correct injectors
ideas?
|