Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - Odd electrical issues: lights stay on, gauges don't work

rps13_fastback · 10-18-2004, 02:26 AM

I just completed an SR swap into my 92 240sx. I'm having some weird electrical problems.

1. The seat belt/parking brake/door ajar lights stay on even after I remove the key from the ignition.

2. The seat belt chime stays on even after I remove the key from the ignition.

3. The fuel and temp gauge on the cluster do not work (the temp gauge is a different story though. My coolant temp sensor isn't plugged in) But what gives for the fuel gauge?

4. My dome light doesn't work anymore

-I haven't replaced the fuel pump yet.
-I used my stock 92 cluster, didn't touch it. Tach/speedo work fine.
-Sometimes when I push the parking brake button the light will turn on/off.
-My radio is not connected (I took it off cause the car is sitting outside so I don't want theives seeing it). When I touch the wiring sometimes the parking brake lights will go on/off.

Anyone know what it could be?

10-18-2004, 02:26 AM	#1
rps13_fastback Zilvia Addict Join Date: Nov 2003 Location: Bay Area, CA Age: 42 Posts: 635 Trader Rating: (0)	Odd electrical issues: lights stay on, gauges don't work I just completed an SR swap into my 92 240sx. I'm having some weird electrical problems. 1. The seat belt/parking brake/door ajar lights stay on even after I remove the key from the ignition. 2. The seat belt chime stays on even after I remove the key from the ignition. 3. The fuel and temp gauge on the cluster do not work (the temp gauge is a different story though. My coolant temp sensor isn't plugged in) But what gives for the fuel gauge? 4. My dome light doesn't work anymore -I haven't replaced the fuel pump yet. -I used my stock 92 cluster, didn't touch it. Tach/speedo work fine. -Sometimes when I push the parking brake button the light will turn on/off. -My radio is not connected (I took it off cause the car is sitting outside so I don't want theives seeing it). When I touch the wiring sometimes the parking brake lights will go on/off. Anyone know what it could be?