Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

vegita319 · 10-19-2004, 11:06 PM

I didnt' answer your question. To set it the pulley at TDC, make sure the the alignment pin is directly above the yellow mark of the pulley (I think its the second one from the left) if your yellow mark faded like mine did. You can go to here for pictures: http://www.240sx.org/faq/articles/timing101.htm . For a Factory Service manual of the cam alignment go here: http://www.zeroyon.com/TheSite/techservice.html . Hope that helps.

10-19-2004, 11:06 PM	#2
vegita319 Zilvia Junkie Join Date: Aug 2004 Location: Long Beach, CA Age: 39 Posts: 460 Trader Rating: (1)	I didnt' answer your question. To set it the pulley at TDC, make sure the the alignment pin is directly above the yellow mark of the pulley (I think its the second one from the left) if your yellow mark faded like mine did. You can go to here for pictures: http://www.240sx.org/faq/articles/timing101.htm . For a Factory Service manual of the cam alignment go here: http://www.zeroyon.com/TheSite/techservice.html . Hope that helps. Last edited by vegita319; 10-19-2004 at 11:09 PM.. Reason: Answer the cam timing setting