Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

sunrat · 12-04-2014, 08:03 AM

Hey,

So, I'm in the process of wanting to completely take out my factory exhaust setup and buy an aftermarket one instead. The only reason I'm doing this is because the exhaust I have now is starting to rust pretty bad.

ImageUploadedByTapatalk1417705132.975676.jpg

Where it shows number 9 and 10 is where it's starting to break off and makes a bad rattling noise when I'm in gear.

I'm looking at this setup

ImageUploadedByTapatalk1417705191.437460.jpg

But the problem I see is that there is no pipe going from the headers to the catalytic converter. So, if you looked at the first picture it would be number 4 that I'm worried about. Am I missing something? I don't want to use that same secondary pipe.

Anyway, how many cat converters are there on the zenki? Just one? Also, would I need to buy heat shields for this setup,especially on the header so it doesn't melt the master brake cylinder?

Also, do I have to worry about clearance? I have s tech springs with agx.

Help! And thanks!

12-04-2014, 08:03 AM	#1
sunrat Leaky Injector Join Date: Dec 2005 Location: Peoria, IL Posts: 81 Trader Rating: (0)	S14 zenki exhaust questions Hey, So, I'm in the process of wanting to completely take out my factory exhaust setup and buy an aftermarket one instead. The only reason I'm doing this is because the exhaust I have now is starting to rust pretty bad. ImageUploadedByTapatalk1417705132.975676.jpg Where it shows number 9 and 10 is where it's starting to break off and makes a bad rattling noise when I'm in gear. I'm looking at this setup ImageUploadedByTapatalk1417705191.437460.jpg But the problem I see is that there is no pipe going from the headers to the catalytic converter. So, if you looked at the first picture it would be number 4 that I'm worried about. Am I missing something? I don't want to use that same secondary pipe. Anyway, how many cat converters are there on the zenki? Just one? Also, would I need to buy heat shields for this setup,especially on the header so it doesn't melt the master brake cylinder? Also, do I have to worry about clearance? I have s tech springs with agx. Help! And thanks!