Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

JDMBart · 12-28-2014, 09:05 PM

Alright so I have a s13 240sx and my SAI and included angle is way off. I'm not exactly sure what I should look into to fix this or if it is even worth my time to fix. Here are my specs. I know my car was in a small collision previously but it was only the radiator support being a little bent on the left side so I do not think it affects this. Any input would be great.

Front Left
Camber -3.1 (spec is 0- 1.5)
Caster 6.9 (Spec is 6.0-7.5)
Toe 0.10 (Spec is .02-.11)
SAI 16.6(Spec is 12.5- 14.0)
Included Angle 13.6 (spec is 11.0 to 14.0)

Front Right
Camber -3.1 (spec is 0- 1.5)
Caster 7.1 (Spec is 6.0-7.5)
Toe 0.10 (Spec is .02-.11)
SAI 22.1 (Spec is 12.5 - 14.0)
Included Angle 19.0 (spec is 11-14.0)

12-28-2014, 09:05 PM	#1
JDMBart Banned from the Marketplace Join Date: Aug 2013 Location: Chicago Posts: 340 Trader Rating: (-1)	SAI way off... Alignment question Alright so I have a s13 240sx and my SAI and included angle is way off. I'm not exactly sure what I should look into to fix this or if it is even worth my time to fix. Here are my specs. I know my car was in a small collision previously but it was only the radiator support being a little bent on the left side so I do not think it affects this. Any input would be great. Front Left Camber -3.1 (spec is 0- 1.5) Caster 6.9 (Spec is 6.0-7.5) Toe 0.10 (Spec is .02-.11) SAI 16.6(Spec is 12.5- 14.0) Included Angle 13.6 (spec is 11.0 to 14.0) Front Right Camber -3.1 (spec is 0- 1.5) Caster 7.1 (Spec is 6.0-7.5) Toe 0.10 (Spec is .02-.11) SAI 22.1 (Spec is 12.5 - 14.0) Included Angle 19.0 (spec is 11-14.0)