Quote:
Originally Posted by Hoffman5982
I have the Cody Ace bracket with a '99 quest alternator and the belt that came with my kit is the 5PK935, and I have never had a fitment issue. When I loosen it up it easily slides off. Post a pic of your setup if you don't mind.
|
Not sure what year alternator I have but think its '99 aswell. Ended up getting a 5pk945, still had to use a little elbow grease to get it on but once I did it was loose, then adjusted the tension accordingly.
Nothing special about my setup. Just a stock redtop sr in a 180sx.
Quote:
Originally Posted by nmiqiobe
You can upgrade to a high strength bolt as well to prevent it from shearing off.  |
Bolt that came with the kit was 10.9
Quote:
Originally Posted by KoukiMonsta
I do not have a kit from Cody.
I do have a quest alt on my s13 SR20DET
I did have to buy a (slightly) longer belt to make it all work when swapping alternators.
Sorry no exact answer..simply my experience.
EDIT: I have a 380 belt. 38 inches = 965mm. I made my own turnbuckle/tensioner, no idea if its the same size as codys. clearly mine is much longer than yours (hehe)
Simple solution seems to be a belt that is another 5-10mm. therefore reduced tension
|
5pk945 worked for me