View Single Post
Old 08-26-2015, 08:21 AM   #6
Mr. white
Leaky Injector
 
Mr. white's Avatar
 
Join Date: May 2010
Location: Raleigh
Age: 35
Posts: 93
Trader Rating: (0)
Mr. white is an unknown quantity at this point
Send a message via AIM to Mr. white
Update:


Fixed some things, the fuel pressure holds steady now. But, still not getting spark and injectors are not firing.



After some tests and fixing the wiring some:
- I get 12vs coming from the Coilpacks wires down to the igniter.
- I get 12vs to Injector power wires.
- Cas gets signal and and 12v
- Ignition wires 1,3,5,25(Kouki Harness) do not have any voltage with key in ON or START position. I believe this is why I have no signal with the connector unplugged.
- With injector wires unplugged, If I test for voltage, it begins to read and drops down to 0 , eventually.
- Orange Start signal wire not getting 12vs

I just want to confirm that the orange wire from the dash is suppose to get 12v and sends signal to both injectors and ignition wires? Should it read voltage with key in ON position or only START? I have read mixed answers to this question when I searched.
Mr. white is offline   Reply With Quote