I believe so. This guy swapped his roof skin and he specified that part of the process is to cut the brazing on the roof posts. You can see the seam in the pic:
Quote:
Originally Posted by vaughn4
First started by drilling all the spot welds and cutting the skin off where it was brazed at the posts.
|
Here he has it all welded up at the spot welds with some body filler at the posts.
Quote:
Originally Posted by vaughn4
Here it is all welded in place and some filler on the posts. It was welded in all of the original spot weld holes. Notice a little POR15 in the windshield and back glass frames. Water can run off the roof and get in there, rusting this area over time.
|
Build thread:
http://zilvia.net/f/showthread.php?t=334132&page=2