Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - My KA-T build 91 & E85 Daily driver S14

2.5T_/<ouki · 02-16-2016, 11:05 PM

What I went with was a 45* mild steel bung so when I weld it on it will be at the perfect angle I need so I don't get oil buildup from a low spot in the return line; Wouldn't want to starve the motor of its precious oil! Also, mild steel M18x1.5 (mm) o2 plug (bung plug) and M18x1.5 to -10AN fitting. This all but cost me $18.

02-16-2016, 11:05 PM	#29
2.5T_/<ouki Zilvia FREAK! Join Date: Oct 2011 Location: SoCal Posts: 1,150 Trader Rating: (13)	What I went with was a 45* mild steel bung so when I weld it on it will be at the perfect angle I need so I don't get oil buildup from a low spot in the return line; Wouldn't want to starve the motor of its precious oil! Also, mild steel M18x1.5 (mm) o2 plug (bung plug) and M18x1.5 to -10AN fitting. This all but cost me $18.