Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - E-brake for s13 clarification

derass · 02-17-2016, 06:25 PM

You'll also need the bracket to adapt the Z32 cables to the S13. The ones I have aren't available anymore, but I found this on eBay, same idea:
http://www.ebay.ca/itm/SIN-NISSAN-RP...-/111644926272

Here's another pro-tip: Have a dremel or die grinder with a sanding drum ready. The hole on the S-Chassis knuckle where the anchor block mounts will be rusted and needs to be cleaned up.

02-17-2016, 06:25 PM	#7
derass Zilvia FREAK! Join Date: Jun 2010 Location: Toronto, ON Age: 37 Posts: 1,182 Trader Rating: (0)	You'll also need the bracket to adapt the Z32 cables to the S13. The ones I have aren't available anymore, but I found this on eBay, same idea: http://www.ebay.ca/itm/SIN-NISSAN-RP...-/111644926272 Here's another pro-tip: Have a dremel or die grinder with a sanding drum ready. The hole on the S-Chassis knuckle where the anchor block mounts will be rusted and needs to be cleaned up.