The 350z has a returnless type fuel system from factory and the new engine doesn't so it's time to add some lines for the fuel return lines.
Here's the hard line, some fittings and the pump return plumbing.
Not much to see here and it's all hidden, but here is the fuel pump return. The hose goes to a machined piece that replaces the factory pressure regulator (this is a cj motorsport kit)
Old factory Nissan clutch and pressure plate here to be replaced with an ACT clutch, also a lightweight flywheel to replace the vq35s dual mass flywheel.
New Flywheel and 6 puk clutch.
With the gearbox adaptor plate I had to make up a flywheel spacer.
Front
Back
Here it is all put together.
With Gearbox on.
