Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

NoFlex · 03-11-2016, 07:23 PM

Hello,

So I am having a hard time getting my sr20 trans to shift. It takes a lot of effort to put the shifter in any gear. I recently installed a new clutch kit and a used KA trans because my old trans was popping out of 4th. I adjusted and bled my clutch, the slave pin is getting full travel when depressing the clutch, so what could be the problem ?

Last season one of my clutch springs popped off and it felt similar to this, that is the reason I bought a new clutch kit and replaced the trans while I was at it.

03-11-2016, 07:23 PM	#1
NoFlex Zilvia Member Join Date: Jan 2015 Location: USA Posts: 236 Trader Rating: (0)	Transmission hard to shift!? Hello, So I am having a hard time getting my sr20 trans to shift. It takes a lot of effort to put the shifter in any gear. I recently installed a new clutch kit and a used KA trans because my old trans was popping out of 4th. I adjusted and bled my clutch, the slave pin is getting full travel when depressing the clutch, so what could be the problem ? Last season one of my clutch springs popped off and it felt similar to this, that is the reason I bought a new clutch kit and replaced the trans while I was at it.