Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

s13q · 03-21-2016, 02:33 PM

So I have a really soft/spongy brake pedal.

I have changed the master cylinder, calipers, pads, lines, discs etc and still the same problem!

Im quite convinced the ABS module has air in it, since ABS doesnt even work and the car always locks up.

The booster is healthy and working well as I have tested it, even if it was faulty the pedal would be rock hard and not soft.

Anyways, when I pump the brake pedal it gets no better. Its a terrible feel.

Any ideas guys? does the ABS module need to be bleed seperately?

03-21-2016, 02:33 PM	#1
s13q Leaky Injector Join Date: Sep 2012 Location: Sydney Posts: 91 Trader Rating: (0)	Soft brake pedal problem! ABS? So I have a really soft/spongy brake pedal. I have changed the master cylinder, calipers, pads, lines, discs etc and still the same problem! Im quite convinced the ABS module has air in it, since ABS doesnt even work and the car always locks up. The booster is healthy and working well as I have tested it, even if it was faulty the pedal would be rock hard and not soft. Anyways, when I pump the brake pedal it gets no better. Its a terrible feel. Any ideas guys? does the ABS module need to be bleed seperately?