I would recommend putting in vents / air tubes to go around the radiator. Basically just like how you can have tubes for the track car that go from the front bumper to the brake rotors, do the same but have them go to the engine if you are going to keep the electric fans.
Common issue out here is air flow. A lot of people will go with aftermarket radiators and dual fan setups which work great when not moving but the fans normally have very little room to allow air to pass through when on the freeway or moving. Often recommended keeping the clutch fan on most engines due to this. In our state at least (Hell).
We would put the vent tubes in some cars that were dailied and it would work great because it would provide the air needed and they didnt have to get rid of the fans for when they arent moving. Solved many heating issues.
Recommended to try. Shouldnt cost more than about $20 for the Tubes from Home Depot if that.
Love the build. I love verts and want one someday to do a removable hard time too. Something I have been wanting to do for a long time but never have the money or time to do.
Thank you for sharing your build.
__________________

S14 KA NA two cylinders, 75whp limper
|