Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - CA 18" BRONZE Volk Rays TE37SL 9.5JJ +15 114.3PCD 5H (PAIR ONLY!)

DomChan · 10-10-2016, 02:18 PM

Hey guys,

Today I have a PAIR of TE37SL in the size listed above. They were originally 5x120 PCD and had them redialed to 5x114.3. There was also one minor crack in the inner barrel that was about 1/2 of an inch long (the weld-repair extends outwards 1/2" past the end of crack). Since the repair, I've driven about 1,500 miles on the wheels and it has the 37~ PSI with no leak issues at all. There is also one small scuff from hitting a gigantic pothole and rubbing slightly on inner fender. TIRES NOT INCLUDED

The crack was repaired locally by a wheel builder located in Chula Vista, Lee Cruz. You can view some of his work via Instagram;

https://www.instagram.com/chamorroboy86/

Originally, the wheels were the Pressed Graphite color from Volk Rays factory. I took them to Velocity Powdercoating located in Riverside/IE area to get bronze powdercoat. The bronze is a custom mix that was made to replicate the finish that Volk Rays offered on TE37 wheels back then. (Newer Volk Rays bronze is a different formula).

Located in San Diego, California

Price: $975 SHIPPED FIRM NO TRADES!!!

Here are some pics,

*REPAIRED CRACK*

OG BRONZE - LEFT, POWDERCOAT - RIGHT

OG BRONZE - TOP, POWDERCOAT - BOTTOM

OG BRONZE - BOTTOM, POWDERCOAT - TOP

OG BRONZE - FRONT, POWDERCOAT - REAR

Eventually I just powder coated the fronts to match.

10-10-2016, 02:18 PM	#1
DomChan Zilvia FREAK! Join Date: Aug 2010 Location: San Diego Posts: 1,207 Trader Rating: (23)	18" BRONZE Volk Rays TE37SL 9.5JJ +15 114.3PCD 5H (PAIR ONLY!) Hey guys, Today I have a PAIR of TE37SL in the size listed above. They were originally 5x120 PCD and had them redialed to 5x114.3. There was also one minor crack in the inner barrel that was about 1/2 of an inch long (the weld-repair extends outwards 1/2" past the end of crack). Since the repair, I've driven about 1,500 miles on the wheels and it has the 37~ PSI with no leak issues at all. There is also one small scuff from hitting a gigantic pothole and rubbing slightly on inner fender. TIRES NOT INCLUDED The crack was repaired locally by a wheel builder located in Chula Vista, Lee Cruz. You can view some of his work via Instagram; https://www.instagram.com/chamorroboy86/ Originally, the wheels were the Pressed Graphite color from Volk Rays factory. I took them to Velocity Powdercoating located in Riverside/IE area to get bronze powdercoat. The bronze is a custom mix that was made to replicate the finish that Volk Rays offered on TE37 wheels back then. (Newer Volk Rays bronze is a different formula). Located in San Diego, California Price: $975 SHIPPED FIRM NO TRADES!!! Here are some pics, REPAIRED CRACK OG BRONZE - LEFT, POWDERCOAT - RIGHT OG BRONZE - TOP, POWDERCOAT - BOTTOM OG BRONZE - BOTTOM, POWDERCOAT - TOP OG BRONZE - FRONT, POWDERCOAT - REAR Eventually I just powder coated the fronts to match. Last edited by DomChan; 10-29-2016 at 10:05 PM..