|
i researched into this b4 i swapped mine. this info was taken from sillbheer's website
For S13 Rear:
S14 SE or Z32 N/A Hubs
S14 SE Rotors (or 4 lug rotors re-drilled to 5 lug)
5 Lug Wheels
For S13 Front:
S14 SE Hubs
S14 SE Spindles
S14 Ball Joint (will need to be pressed into your existing S13 Lower Control Arm)
S14 SE Rotors (or 4 lug rotors re-drilled to 5 lug)
5 Lug Wheels
if you are planing to convert the fronts i HIGHLY suggest just gettin aftermarket conversion hubs (Attain, GTO, Signal Auto ect.) thats what i did. it will save u money and its all you need for the conversion and alot less work. as for the rears all you need are the hubs and rotors
or if you are looking for a cheaper way you can just buy 4 to 5 lug 15mm conversion spacers and save on labor. unless u own a wheel bearing press
|