Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

hvp014 · 01-16-2017, 02:51 AM

Small update

Got a chance to install the Nismo wheel studs (+20mm) and threw the LMGT1's back on after a good cleaning.

Was able to wrap the down and screamer pipe in wrap and blanket the turbine to help with under-hood heat.

And finally got the car back from detailing, and was able to work out the fine scratches.

Before and after!

Up next would be an alignment and some good driving.

01-16-2017, 02:51 AM	#70
hvp014 Leaky Injector Join Date: Aug 2012 Location: Okinawa, Japan Age: 36 Posts: 50 Trader Rating: (0)	Small update Got a chance to install the Nismo wheel studs (+20mm) and threw the LMGT1's back on after a good cleaning. Was able to wrap the down and screamer pipe in wrap and blanket the turbine to help with under-hood heat. And finally got the car back from detailing, and was able to work out the fine scratches. Before and after! Up next would be an alignment and some good driving.