Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Kid Zelda · 12-15-2004, 04:31 PM

Ok, I will help

Check this.

If you had 370cc injector tested at 43 psi and now tested at 50 psi, it would go like this.

50
----- = 1.1627 * 50 is the new fuel pressre, 43 was the old fuel pressure
43

Now find the SQ root of 1.1627 = 1.0763

Now multiply the old flow rate by sq root

370cc X 1.0763 = 398CC is the new rate @ 50 psi

you're welcome

12-15-2004, 04:31 PM	#3
Kid Zelda BANNED Join Date: Oct 2001 Posts: 2,347 Trader Rating: (0)	Ok, I will help Check this. If you had 370cc injector tested at 43 psi and now tested at 50 psi, it would go like this. 50 ----- = 1.1627 * 50 is the new fuel pressre, 43 was the old fuel pressure 43 Now find the SQ root of 1.1627 = 1.0763 Now multiply the old flow rate by sq root 370cc X 1.0763 = 398CC is the new rate @ 50 psi you're welcome Last edited by Kid Zelda; 12-15-2004 at 05:07 PM..