|
I'm running the Megans with a 17x7.5, +35 and they just BARELY cleared without modification. This is a wheel with 5.13" of backspacing. The stock Alloys are 15x6 +40 and have a 4.57" backspacing so I'm pretty sure they'd fit just fine. The less backspacing, the further from the strut the inside edge of the wheel gets.
I modified my coilovers where they mount to the spindle. I elongated the upper hole so I could get more gap between the wheel and coilovers, and also remove some of the negative camber. I wanted my front end to have 0 camber when the camber plate was set at 0. Out of the box, when the camber plate was on 0, I had quite a bit of negative camber, and I've still got wheel well gap.
They take a few days to wear in, but they're nice now. I was suprised to see just how high quality they appeard to be, they even came with new nuts for the upper strut mounts.
|