[R3b]

Yes then you are right so im guessing timing is off 100%. If im getting "TDC" marks at 5BTDC then im off a tooth on my sprocket. Look at all these other pictures and you can see theyre half way. Im 90% most of these are at TDC since the posters on the threads I got them from just did there timing so im assuming the motor is still at tdc for them.









Even checked the fsm diagrams and its the samething, at TDC its 5 marks with the last on by the guide with half of it below it. EM-17 if you want to check.