Quote:
Originally Posted by 2_Liter_Turbo
That's one of the issues of running sphericals on both the inboard and outboard side of an arm. Also another reason why mixing brands is always risky, as the parts weren't designed with each other in mind. The PBM RUCAs will clear the axle with no issues. However, the adjusters are a PITA and if you need negative camber in the rear, they may be a bit long ( I was only able to get -.8° bottomed out). I went with SPL for that reason (I have PBM rear knuckles) and have no issues now.
|
That's pretty much the response I got. Voodoo doesn't mention that their arms would have issues if you are not using stock knuckles.
Same with gktech, they just say you need aftermarket arms. Not specifically their arms.