Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post - 1UZFE into S-Chassis

914Slide · 05-31-2017, 07:41 PM

^^^^^^^ I will be testing the ds asap. It shouldn't be much effort at this point to find out 100%. I have the trans matted and adapted i took everything back out and corrected the 1/8 of and inch, its more like less then a 16th now! i have started modding the header i have 2 more tubes to get thru then recollect, after the steering shaft. Im going to need to wire this thing up soon everyone says its the easy part... I didn't have to battle the trans under the car, I didn't wanna do my nice new clutch under the car and battle in a old trans. old input shafts are the best alignment tools. We got it in with a good ol chain and man power through the top. Its tight on the way in.

05-31-2017, 07:41 PM	#7
914Slide Leaky Injector Join Date: Nov 2013 Location: ny Age: 31 Posts: 99 Trader Rating: (0)	driveshaft ^^^^^^^ I will be testing the ds asap. It shouldn't be much effort at this point to find out 100%. I have the trans matted and adapted i took everything back out and corrected the 1/8 of and inch, its more like less then a 16th now! i have started modding the header i have 2 more tubes to get thru then recollect, after the steering shaft. Im going to need to wire this thing up soon everyone says its the easy part... I didn't have to battle the trans under the car, I didn't wanna do my nice new clutch under the car and battle in a old trans. old input shafts are the best alignment tools. We got it in with a good ol chain and man power through the top. Its tight on the way in.