Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

Eoken · 10-16-2017, 10:38 PM

Drilled holes and mounted my G-Corp wing today! I found some plugs out of an infinity G20 trunk. I used a very large washer and a standard Nissan 10mm bolt with blue loctite on it to secure the wing. For the measurements I used some that I found on drift works and did about 20mm from the back of the hatch and 30mm from the wi Dow and 60mm on either side left and right.

Top (left)

Bottom (left)

Top (right)

Bottom (right)

Bare metal will get painted soon when everything is finalized with the body work.

Origin shipment gets to my house on Thursday this week!! Stay tuned!!

10-16-2017, 10:38 PM	#21
Eoken Zilvia Member Join Date: Feb 2015 Location: Austin, TX Posts: 188 Trader Rating: (1)	Drilled holes and mounted my G-Corp wing today! I found some plugs out of an infinity G20 trunk. I used a very large washer and a standard Nissan 10mm bolt with blue loctite on it to secure the wing. For the measurements I used some that I found on drift works and did about 20mm from the back of the hatch and 30mm from the wi Dow and 60mm on either side left and right. Top (left) Bottom (left) Top (right) Bottom (right) Bare metal will get painted soon when everything is finalized with the body work. Origin shipment gets to my house on Thursday this week!! Stay tuned!!