Quote:
Originally Posted by TheRealSy90
It really depends on what engine you are using.
In my opinion the Mazworx kit is the best if you are using an SR20,
EXCEPT for their shifter that they included with it as its not the best.
A S9 or GkTech shifter is many times better, I used GkTech myself and it worked perfectly.
Aside from that the Mazworx kit for SR20 works perfectly and includes everything.
No personal experience with swaps for other engines.
|
This is exactly what I was going to say. Mazworx kit with serial 9 shifter and in my case I’ll be using a shaftmasters driveshaft. The engine is about to be finished hopefully this week and maybe my S9 shifter will be here after a couple months of waiting and then I can tell you my tested thoughts as well. Bellhousing is on and I cut in front of the notch in the trans and then flap wheeled it back a little at a time to get the tightest fit possible. Here’s a picture for those looking to do the same. Also, this is on a JK40 370z trans so it has the extra bolt protrusion (I think) on the side I also cut down.
