Zilvia.net Forums | Nissan 240SX (Silvia) and Z (Fairlady) Car Forum - View Single Post

drifter5 · 01-09-2018, 09:14 PM

Just did mine last year on a '95 S14.

Looks like you're still missing...
-Driveshaft
-Pressure Plate Bolts
-Clutch + Pressure Plate
-Flywheel
-Flywheel bolts
-Dust Cover
-Bell housing bolts
-5 Speed brake pedal (or you can cut your existing one)

Also make sure you get an S14 transmission otherwise if you use an S13, you will have to drill a hole for the CAS and figure out the wiring required for the speed sensor.

I also swapped ECU on mine to a 95 5-speed to get rid of the CEL.

01-09-2018, 09:14 PM	#5
drifter5 Join Date: May 2005 Location: Dallas Posts: 14 Trader Rating: (0)	Just did mine last year on a '95 S14. Looks like you're still missing... -Driveshaft -Pressure Plate Bolts -Clutch + Pressure Plate -Flywheel -Flywheel bolts -Dust Cover -Bell housing bolts -5 Speed brake pedal (or you can cut your existing one) Also make sure you get an S14 transmission otherwise if you use an S13, you will have to drill a hole for the CAS and figure out the wiring required for the speed sensor. I also swapped ECU on mine to a 95 5-speed to get rid of the CEL.