Quote:
Originally Posted by nisileighty
Can you hear the fuel pump prime when you turn the key to the on position? Is it a steady, firm noise? Check voltage at the fuel pump wires and check fuel pressure. Make sure all vacuum lines are intact and your MAF/MAP is wired correctly. Also try retiming your cam angle sensor.
|
Thanks for a fast response, the car has just been tuned on power fc d jetro. Timing was advance to spin over faster but never catch. Then he put it bac where its suspsoe to be when tunning. He got the car to 100mph speeds and shut car off while rolling in the dyno he tried to start it and nothing, so he put in gear and pop the clutch to get back started. He did this several times also adding fuel for start up and reduce and nothing. My eccs relay has power when car switched off but not when car is switched on.